carlos_ddd
- Total activity 11
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 5
Activity overview
Latest activity by carlos_ddd-
carlos_ddd commented,
No DC signal is free of AC, and vice versa. And either can be dangerous when not displayed correctly. So that would be pure guessing which is the current application case. This I am voting to mak...
-
carlos_ddd created a post,
[Multimeter] flash LED red when detecting voltages >65V on AC !AND! DC (regardless of setting)
Hi, working with the pokit Pro in 230V AC household systems I'd consider it to be very useful (if not necessary) to have the LED flash red when detecting a potentially deadly voltage (like 65V -- t...
-
carlos_ddd created a post,
[Multimeter] default AC vs. DC (selectable or default AC)
Working with my pokit Pro I've encountered various situations where I'd use my pokit to verify I properly disconnected or switched off a circuit-breaker in my house to perform work on the electrica...
-
carlos_ddd created a post,
[Oscilloscope] Settings (scale & timebase) changable after aquisition started
Hi, for my daily use it's hard to always have to stop aquisition in oder to be able to change scale or timebase. That is very uncool -- always 3 taps for sacling (stop, change, start) instead of s...
-
carlos_ddd created a post,
[Oscilloscope] Trigger on HW button press (Pokit Pro)
Hi guys, when working with the Pokit Pro on a daily base using it in "probe mode" (not connected permanently to a signal) it's mandatory to have single shot triggered via the button on the Pokit Pr...
-
carlos_ddd created a post,
[App] Oscilloscope crashes on export
PokitPro FW v1.2.0, HW: v1.2.0 iPhone 8 iOs 14.8.1 App crashes on export button usage