Jack Jansen
- Total activity 22
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 4
- Subscriptions 10
Activity overview
Latest activity by Jack Jansen-
Jack Jansen created a post,
Does changing the oscilloscope timebase also change the sample frequency? How?
I'm trying to measure a signal that I know should be 10uS pulses, about 33mS apart. Or, in other words, a block wave with a duty cycle of 0.03%. I can't manage to get this to display. I'm now wonde...
-
Jack Jansen created a post,
Cannot change trigger level?
I have a very strange problem: I cannot seem to change the trigger level anymore. If I set the oscilloscope to one shot I see the trigger indicator with value 0.00 rising. I can move it up by dragg...
-
Jack Jansen created a post,
Issues with website login, app login
So I finally bought the range tester module today, and it looks nice, but I was about to give up. It took me a long time to finally notice that the app loginname/password is a different one than th...
-
Jack Jansen commented,
Like the OP I was also unpleasantly surprised at the news of a subscription model for the range tester and other upcoming modules. But I do fully understand that Pokit needs some form of continuous...
-
Jack Jansen commented,
I'm also experiencing this, also on the iPad. I still had an old version of the app installed (1.5.1 or so), and when it crashed when I tried to save my measurements I updated to the most recent ve...
-
Jack Jansen created a post,
Are there release notes for the v1.7.1 firmware update?
I've just installed the v1.7.1 firmware update, but I can't find any information anywhere on what has changed. The most recent thing I can find is on the v1.5 firmware update.
-
Jack Jansen created a post,
Mode to have "classic free-running CRT oscilloscope" to help with setting trigger
If there was a mode in the oscilloscope where it would simply go from left end of screen to right end and then repeat, just like a classic CRT oscilloscope works, this would help tremendously with ...
-
Jack Jansen created a post,
Feature request: integrate signal view option for scope
I find that I'm using the Pokit a lot for power consumption measurements at the moment, i.e. use the oscilloscope in voltage mode over a 1 ohm resistor between a battery and the system under test. ...