Pockit doesn't measure mV

Mads A.

• November 02, 2021 12:48

Hi, in order to calibrate some components on a bigger machine I thought the pockitmeter would be great. The readout is in mV. My very cheap Chinese multimeter reads the mV fine, but the pockit doesn't read anything useful, it will normally show 0,0mV but occasionally flash with a value around 11.8 mV. (the actual signal is around 14mV). 

I have tested on a battery with voltage of 1.2V, this worked fine, but measuring mV is useless. 

I have also tried replacing the fuse, and continuously made sure that the cables were correctly attached. 

Is this a common thing with these?

0

• 

  Pokit Support Team

  • March 15, 2022 23:00

  Hi there,

  Apologies for getting back to you late.

  We are unsure why it is reading inaccurately at the low end of the range (Pokit Meter is only rated from 10mV). We will try to investigate this further. 

  0

Please sign in to leave a comment.