Incorrect reading but only when using data logger

Comments

6 comments

  • Official comment
    Pokit Support Team

    Hi All,

     

    This is a known Android Issue. The problem relies on the setting the correct range when in logger mode. We will provide a fix to this problem in a new app release which is due soon.

     

    Apologies for the inconvenience and hope this helps.

     

    Thanks to you all.

  • David Hoyle

    I have a similar issue.

     

    Read a 9.8 volt battery and it indicates okay at 9.6V in meter mode or o'scope mode.

     

    Use the data logger and it indicates 0.507 volts . Setting the voltage window from 10 Volts to 60 volts makes no difference. I am in DC mode as well. 

  • Aaron Power

    Thanks David. Good to know at least I'm not alone :)

  • Eric Udell

    I see the same thing as David. Getting 13.3v with the multimeter, .507v on the data logger.

    That's three of us.

    Hey Pokit, what's going on with this?

  • David Hoyle

    I checked out the POKIT on an I-Phone instead of my Android (Samsung S-6) and the POKIT s/w works flawlessly on the I-phone.

     

    So  the POKIT s/w guys can just fix the s/w as it is not a hardware bug. So hopefully in the near future we just need the update!

  • Phil Symonds

    Version 1.0.1 of the Android app fixes this bug and is rolling out now.

Please sign in to leave a comment.

Powered by Zendesk