Pokit Support Team
- Total activity 326
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 32
- Subscriptions 142
Comments
Recent activity by Pokit Support Team-
Hello Robheath, Can you contact us on our support portal so we can debug your issue more thoroughly. https://help.pokitmeter.com/hc/en-us/requests/new
-
Official comment Hello A.R, I'm not particularly familiar with the ina219 but the shunt resistor on the board appears to be 0.1Ohms. With your Owon multimeter it seems to be measuring incorrectly at ~2Ohms, this i...
-
Official comment Hello Bryan, Unfortunately Pokit Meter is not compatible with continuous trigger/sampling modes. See below excerpt form our product specification.hopefully this clears up your misunderstanding.
-
Hello Stephen, Are you able to send a support ticket to our support portal so we can further debug you issue? https://help.pokitmeter.com/hc/en-us/requests/new
-
Hello Chris, Is this on iOS? Weve had some issues with the accuracy of the frequency measurement on iOS. We are currently working on resolving it.
-
Official comment Hello Shane, The way multichannel works for Pokit Pro is different for each mode: Multimeter: The separate channels will measure at the same time but aren't actively being "synchronized" in any way...
-
Official comment Hello Alan, Usually with an Oscilloscope the analog bandwidth is about 10 times less than the sampling frequency. Using that rule the analog bandwidth would be 100kHz but we've found that you can m...
-
Hi there, Thanks for helping point out this problem to us. We are working on a solution. It is because the Pokit is still communicating with the app because the app itself is not closed. We recomme...
-
Hi Marco, Thank you so much for your feedback. The issues you have mentioned in the past 2 posts are known to us and we have working on fixing them. Thanks
-
Hi Marco, Manual calibration will be coming in an app update soon. We will let you know our plans for this soon. Thanks