Step 1: If you haven’t already, setup a Pokit Account in the app
Step 2: Go to our webstore and purchase the add-on module.
To make activation easier, please use the same email address that was used to purchase your add-on module, as your username.
Step 3: Check that you have the latest version of the Pokit App
Step 4: In the Pokit App, navigate to the Devices screen, make sure you are signed into your account. The button on the top left of the screen should indicate “MY ACCOUNT” to confirm you are logged in.
Step 5: Make sure to have at least one Pokit Pro connected with the latest firmware installed.
Range Tester requires at least FW Version 2.0.0. To check your firmware is up to date, navigate to the device settings page by selecting the gear icon in the top right of the connected Pokit Pro. If your device doesn’t have the latest firmware, a button will appear on the Settings page that says “Update Firmware”
Step 6: Select the MEASURE button on the Devices page.
Step 7: Select RANGE TESTER.
You should now be able to use the Pokit Pro Range Tester.
If you have any issues, please consult our FAQ and troubleshooting guide.
Comments
1 comment
Please also add a section about the standalone mode of the range tester: how to enable/disable, and if requires the phone/app to reactivate it onde it stops.
thanks
Please sign in to leave a comment.