Pokit Pro Changelog

Pokit Pro 1.8.0 (Current release)
* New: Support for probe compensation
* Minor bugfixes

Pokit Pro 1.7.1

* Fixed issue with External Temperature probe always measuring OC in Multimeter Mode.

Pokit Pro 1.7.0
* New: Support for calibration.
* Improve BLE handling on iOS.
* Performance improvements.
* Minor bug fixes.

Pokit Pro 1.6.0
* Improvements in AC measurements.
* Improvements in Multi-channel packets.
* Reduce DSO meta delay.
* Fixed: Soft DC compensation in Multimeter mode.
* Fixed: DSO sending invalid number of samples in case of BLE timeout.
* Fixed: Logger reporting wrong scale factor after long sessions.
* Fixed: Logger not updating values properly.
* Improve DSO stability.
* Performance improvements.
* Minor bug fixes.

Pokit Pro 1.5.0
* Fixed: Serial Number displayed as 0 for some devices.
* New: DSO filters.
* Reject bonding requests to prevent some phones from keeping connection alive.
* Minor bug fixes.

Pokit Pro 1.4.0
* Fix LEDs not flashing in sync in multichannel acquisitions.
* Fix bug causing failure during first DSO acquisition in multichannel.
* Fix transmission race condition.
* Improve multi-sync with triggers.
* Fix free run bugs.
* Fixed: One time/Forced acquisition times out sometimes.
* Reduce power consumption.
* Minor bug fixes.

Pokit Pro 1.3.0
* Fixed: DSO not triggering for frequencies over 60kHz
* Fix DMA transition being reflected on DSO frame sometimes.
* Fixed: Internal temperature samples plotted as negative values.
* Fixed: High power consumption depending on the moment stop command is received.
* Fixed: Logger may stop if refresh command is received while auto-ranging.
* Fixed: External temperature displays 13deg C when temperature probe is not connected.
* Fixed: Logger samples drifting over time.
* Update Out Of Range notification in capacitance mode.
* Improve AC measurements.
* Fix LED getting stuck sometimes.
* Production adjustments.
* Performance improvements.
* Minor bug fixes.

Pokit Pro 1.2.1
* Fixed: Open circuit AC current measures ~0.011mA instead of 0A.
* Fixed: Discharging artefact in Lowest current range when AC coupling.
* Fixed: 3M Ohms is flagged as OC.
* Fixed: Serial Number appends extra 0 on Android devices.
* Production adjustments.

Pokit Pro 1.2.0
* Reduce power consumption.
* Calibration improvements.
* Minor bug fixes.

Pokit Pro 1.1.0
* Fix issue with high speed acquisition using multisync trigger.
* Fixed: LED stops flashing if button is pressed in the middle of measurement stage.
* Fix range selection when measuring continuity.
* Minor bug fixes.

Pokit Pro 1.0.0
* Initial release.